Athearn Genesis HO Scale EMD FP45 Standard DC Santa Fe #97
Pickup Available
Pickup Available
Couldn't load pickup availability
Free Shipping Over $250+
Free Shipping Over $250+
Free Shipping:
Free freight applies to the following online orders:
Orders over $250.00
Orders that exclude items marked "Oversize"
Orders that exclude items marked "Dangerous"
- Shipping cost will be automatically calculated on checkout.
- Orders will be shipped via Australia Post or Team Global Express.
- Insurance may be requested on parcels at an additional cost per consignment. Hobbytech will not be held responsible for any losses or damages caused by chosen freight forwarder. All disputes must be taken up with the freight forwarder directly.
- No deliveries will be done outside of Australia.
- By placing your order on the Hobbytech website or via e-mail/telephone/website you accept all the shipping terms listed above.
30 Day Returns Policy
30 Day Returns Policy
Warranty/ Faulty: Refund or Exchange
If you are having trouble with any of your purchases, and suspect it could be a warranty issue, then please email or phone us to go through your item's history of use and background. We are very reasonable when it comes to faults, and will try and resolve any concerns you have as quickly and painlessly as possible.
Each product is covered by the respective manufacturers warranty policy and some products may have individual components that are covered by separate warranties and time frames. We do not offer any additional product warranties outside the manufacturer’s warranty.
Please discuss any warranty concerns with us before sending the items back to avoid any confusion and unnecessary costs. We will generally require you to send photos of the product with your purchase details for an initial assessment and we will go from there.
Postage costs will be at the returner’s expense and refunded if the product is proven to be covered by warranty.
If the product is required to be sent back to our suppliers for assessment, we will cover this cost.
We will always try to resolve any warranty concerns as quickly as possible, where any delay is incurred we will communicate this to you.
- A warranty refers to any new product which has a manufacturing defect or a major failure within a reasonable period.
- If the warranty relates to a minor failure then we may replace, repair or refund the item.
- On assessment if the product is deemed as having a major failure, the customer can decide whether they would like a replacement, repair or refund.
- A warranty does not apply to any wear and tear on a product, crash damage or a product being used outside it’s intended use.
For further information, please refer to https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund
Posting Returns
When sending items back for exchange, refund, repair or warranty assessment please post to our main office at the following address:
Hobbytech Toys
18/276 Leach Highway
Myaree
WA
6154
Need help finding a hobby?
Get Our Advice
-
Description
This is the Athearn Genesis HO Scale EMD FP45 Standard DC Santa Fe #97
PROTOTYPE SPECIFIC INFORMATION
In By the early 1960’s the Electro-Motive Division (EMD) was at a big disadvantage. Their 567 engine, in use for over 20 years, had reached it’s peak at 2,500 horsepower in a turbocharged 16-cylinder version. EMD released a new 645 engine in 1966. The most powerful locomotive using this series of engine was the SD45, powered by a 20-cylinder turbocharged 645E engine producing 3600 horsepower. EMD then offered the V20 645E engine in the SDP45 in a standard hood configuration and longer frame to occomodate the steam generator needed for passenger service. The EMD SDP45 was a good passenger locomotive, but to the Santa Fe Railway it did not look the part. EMD therefore designed a lightweight “cowl” body to cover the locomotive, though it did not, as in earlier cab units, provide any structural strength, which remained in the frame. The cowl provided sleeker looks, better aerodynamics at speed, and allowed the crew to enter the engine compartment en route for diagnostics and maintenance. After sponsoring the development of the FP45 passenger locomotive, the Santa Fe requested a similar freight locomotive from Electro-Motive. Where the FP45 was an SDP45 wrapped in a full-width Cowl carbody, the new F45 was essentially an SD45 given the same treatment.
F45 SERIES LOCOMOTIVE FEATURES:
- Full cab interior
- Wire grab irons
- Coupler cut levers
- See-through cab windows
- Flexible rubber trainline hose
- Flexible rubber MU hoses
- Lift rings
- Windshield wipers
- Walkway tread
- Flush mounted port hole window glass
- Flexicoil-C sideframes with high brake cylinders
- Body-mounted McHenry® operating scale knuckle couplers
- DCC-ready features Quick Plug™ plug-and-play technology with 21-pin NEM connector
- Fine-scale Celcon handrails for scale appearance
- Detailed fuel tank with fuel fillers, fuel gauges, and breather pipes
- Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
- All-wheel drive with precision gears for smooth & quiet operation
- All-wheel electrical pickup provides reliable current flow
- Wheels with RP25 contours operate on all popular brands of track
- Bidirectional LED lighting
- Heavy die-cast frame for greater traction and more pulling power
- Scaled from prototype resources including drawings, field measurements, photographs, and more
- Accurately-painted and –printed paint schemes
- Fully-assembled and ready-to-run
- Packaging securely holds model for safe storage
- Minimum radius: 18” — Recommended radius: 22”
ATSF FEATURES:
- Nose-mounted headlight
- 3-chime Leslie horn
- Roof A/C
- ATSF-style antenna setup
- Passenger service style plow
- Blanked out cab gyralights
ROAD NUMBER SPECIFIC FEATURES:
- #90 Cab-mounted red horn
- #96 Body-mounted silver horn
- #97 Body-mounted red horn, left side cab sunshade
SOUND-EQUIPPED MODELS ALSO FEATURE
- Onboard DCC decoder with SoundTraxx Tsunami2 sound
- Sound units operate in both DC and DCC
- Full DCC functions available when operated in DCC mode
- Engine, horn, and bell sounds work in DC
- All functions NMRA compatible in DCC mode
- Precision slow speed control
- Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
- Many functions can be altered via Configuration Value (CV) changes
- CV chart included in the box
Product Specs
Frequently Asked Questions
How long does order processing take?
Most orders received before 14:00 are shipped out the same day.
How long will it take to receive my order?
Depending on where you are located - Standard shipping normally takes 3-5 days.
Where is Hobbytech Toys Located?
Hobbytech Toys is located at Unit 18, 276 Leach Highway, Myaree, Western Australia, 6154
Store Opening Hours
Hobbytech Toys is Open Monday - Saturday 09:00 -17:00 & Sunday + Most Public Holidays 11:00 - 17:00.
We are closed on New Years Day, Australia Day, Anzac Day & Christmas Day.
Brand New Releases



