UGEARS 70174 Top Fuel Dragster Wooden Model Kit
UGEARS 70174 Top Fuel Dragster Wooden Model Kit is backordered and will ship as soon as it is back in stock.
Please note: Card payments may require additional verification (click to learn more)
Couldn't load pickup availability
-
Description
-
Returns
-
Shipping
Top fuel dragsters are the undisputed kings of the dragstrip. Able to accelerate from 1-100 mph in under a second, with 5 G's of force at launch (more G's than an F-18 catapulted off the deck of an aircraft carrier) and top speeds of 335 mph, top fuel dragsters are the automotive epitome of technology, power and speed. With their long dragonfly-like bodies, fiery exhaust plumes, large top fins, and parachute-aided stops, these iconic racers have long fired the imaginations of everyone who loves fast cars, a good head-to-head battle, and a touch of crazy. Drag racing—a battle of acceleration conducted on a straight track—was born in dry lake beds in California in the 1930's. Regional and national championship races for dragsters and motorcycles have been held in the U.S.A. since the 1950's, and from there the sport has moved to many countries around the world.
Named for the very rich air-fuel mix of 90% nitromethane and methanol that powers the car's 11,000 horsepower engines (the equivalent power of ten Formula 1 cars combined), a top fuel dragster consumes fuel at the rate of 11 gallons per second—the same burn rate as a Boeing 747 jet aircraft, only the dragster engine is four times more efficient! On the straightaway a top fuel dragster will leave the fastest Bugatti or Porsche in the dust—it's not even a competition. The quarter-mile record for top fuel dragsters is an incredible 3.6 seconds!
One look at the Top Fuel Dragster by Ugears tells you this is no ordinary toy car. The model is driven by a powerful spring motor and gear set that transmits power through the crankshaft and belt drive (a rubber band passing through a tensioner with roller) to the rear wheels, which have special silicone gaskets for extra grip. The DIY wooden model has a Start/Stop button, variable driving modes, and is able to rear up on its back tires when peeling out, just like a real dragster. The Top Fuel Dragster has an open "skeleton" body, revealing the beauty and amazing inner mechanics of this racer.
To operate the model, make sure the "start/stop" switch is set to the "stop" position, then twist the non-removable winding knob at the back of the Dragster about a dozen times in a clockwise direction. Place the Dragster on the floor and while holding it with one hand, flip the "start/stop" button to "start," then release. Because this is Ugears, and because we love including realistic details that add that "wow!" factor, in the "stop" position, the air intake dampers are closed and in the "start" position they open!
Real top fuel dragsters have an engine life cycle of just 3 minutes, including warm-up. After each 4-second run they are disassembled, inspected, and cleaned; damaged or worn parts are replaced (clutch, pistons, connecting rods, rings, spark plugs); and the engine completely rebuilt in about 40 minutes, to be ready for the next run. Mercifully, our stunning DIY wooden model Top Fuel Dragster doesn't require that level of maintenance, but do take care in construction to properly sand and lubricate all moving parts for optimal function. Be sure to carefully follow the step-by-step instructions, available in 11 languages (English, German, Ukrainian, French, Polish, Spanish, Russian, Japan, Italian, Chinese and Korean), to guide your build.
The Top Fuel Dragster is a proud addition to our growing catalog of Ugears race cars, motorbikes, trucks and other outstanding automotive DIY models. This speed demon is a worthy opponent for the Drift Cobra in your Ugears race club, and covers up to 8 m on a single winding. The Dragster model kit has 321 pieces, is rated "Advanced" difficulty, and promises 8+ hours of assembly fun. Start your collection ofUgears wooden model cars today, then branch out as you explore the wonderful world of Ugears 3D puzzles, DIY model kits, automatons, robots, wooden puzzle boxes and STEM Lab model kits.
The Ugears Top Fuel Dragster will appeal to those who feel the need for speed, race junkies, car lovers, automotive model enthusiasts, and anyone who likes a bit of badassery.
Specification
- Number of components: 321
- Estimated time of assembly: 8 hours
- Level: Advanced
- Model size: 15.3*4.7*5.1 in (39*12*13 cm)
- Package size: 14.9*6.7*1.2 in (37.8*17*3.1 cm)
Warranty/ Faulty: Refund or Exchange
If you are having trouble with any of your purchases, and suspect it could be a warranty issue, then please email or phone us to go through your item's history of use and background. We are very reasonable when it comes to faults, and will try and resolve any concerns you have as quickly and painlessly as possible.
Each product is covered by the respective manufacturers warranty policy and some products may have individual components that are covered by separate warranties and time frames. We do not offer any additional product warranties outside the manufacturer’s warranty.
Please discuss any warranty concerns with us before sending the items back to avoid any confusion and unnecessary costs. We will generally require you to send photos of the product with your purchase details for an initial assessment and we will go from there.
Postage costs will be at the returner’s expense and refunded if the product is proven to be covered by warranty.
If the product is required to be sent back to our suppliers for assessment, we will cover this cost.
We will always try to resolve any warranty concerns as quickly as possible, where any delay is incurred we will communicate this to you.
- A warranty refers to any new product which has a manufacturing defect or a major failure within a reasonable period.
- If the warranty relates to a minor failure then we may replace, repair or refund the item.
- On assessment if the product is deemed as having a major failure, the customer can decide whether they would like a replacement, repair or refund.
- A warranty does not apply to any wear and tear on a product, crash damage or a product being used outside it’s intended use.
For further information, please refer to https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund
Posting Returns
When sending items back for exchange, refund, repair or warranty assessment please post to our main office at the following address:
Hobbytech Toys
18/276 Leach Highway
Myaree
WA
6154
The cost of shipping is determined as follows:
- Shipping cost will be automatically calculated on checkout.
- Orders will be shipped via Australia Post, Star Track or Toll IPEC.
- Hobbytech will not be held responsible for any losses or damages caused by chosen freight forwarder. All disputes must be taken up with the freight forwarder directly.
- At checkout you will have the option to select Express or Standard Delivery.
- No deliveries will be done outside of Australia.
- By placing your order on the Hobbytech website you accept all the shipping terms listed above.
Free Shipping:
Free freight applies to the following online orders:
- Orders over $150.00
- Orders that exclude items marked "Oversize"
- Orders that exclude items marked "Dangerous"
We have several checks in place to make sure you get the items that you are after and they reach you in good order. If for some reason you didn’t receive the item you ordered, it’s damaged or simply not what you expected then please let us know within 7 days of receiving so we can organise an exchange or refund, whichever you prefer! For items damaged in transit a picture of the packaging will be required.
As per Change of Mind, the goods will need to be returned in original condition. Return shipping is at your expense. A restocking fee of 15% + any freight charges incurred will be deducted from the total refund amount.
If the mistake was made at our end, we will happily pay the return postage.
If no one is around when delivery is attempted, a delivery slip with contact information will be left for you to arrange a re-delivery (charges may apply).
Oversize Items (Rc planes etc):
Oversize items will be quoted for on a 'per order' basis. Once we receive your order, we will contact you with a freight quote for freight on the order. You will then have the choice to accept and pay for the freight or cancel the order.
Warranty/ Faulty: Refund or Exchange
If you are having trouble with any of your purchases, and suspect it could be a warranty issue, then please email or phone us to go through your item's history of use and background. We are very reasonable when it comes to faults, and will try and resolve any concerns you have as quickly and painlessly as possible.
Each product is covered by the respective manufacturers warranty policy and some products may have individual components that are covered by separate warranties and time frames. We do not offer any additional product warranties outside the manufacturer’s warranty.
Please discuss any warranty concerns with us before sending the items back to avoid any confusion and unnecessary costs. We will generally require you to send photos of the product with your purchase details for an initial assessment and we will go from there.
Postage costs will be at the returner’s expense and refunded if the product is proven to be covered by warranty.
If the product is required to be sent back to our suppliers for assessment, we will cover this cost.
We will always try to resolve any warranty concerns as quickly as possible, where any delay is incurred we will communicate this to you.
- A warranty refers to any new product which has a manufacturing defect or a major failure within a reasonable period.
- If the warranty relates to a minor failure then we may replace, repair or refund the item.
- On assessment if the product is deemed as having a major failure, the customer can decide whether they would like a replacement, repair or refund.
- A warranty does not apply to any wear and tear on a product, crash damage or a product being used outside it’s intended use.
For further information, please refer to https://www.accc.gov.au/consumers/consumer-rights-guarantees/repair-replace-refund
Posting Returns
When sending items back for exchange, refund, repair or warranty assessment please post to our main office at the following address:
Hobbytech Toys
18/276 Leach Highway
Myaree
WA
6154
Frequently Asked Questions
Shipping
How long does order processing take?
How long does order processing take?
Most orders received before 14:00 are shipped out the same day.
How long will it take to receive my order?
How long will it take to receive my order?
Depending on where you are located - Standard shipping normally takes 3-5 days. Express Shipping shipping is available on most orders (for an additional charge).
Store Info
Where is Hobbytech Toys Located?
Where is Hobbytech Toys Located?
Hobbytech Toys is located at Unit 18, 276 Leach Highway, Myaree, Western Australia, 6154
Store Opening Hours
Store Opening Hours
Hobbytech Toys is Open Monday - Saturday 09:00 -17:00 & Sunday + Most Public Holidays 11:00 - 17:00.
We are closed on New Years Day, Australia Day, Anzac Day & Christmas Day.